Genuine NGK CM-6 spark plug
$8.50
3mm x 6mm Petrol fuel tubing.
$3 per Metre
RcExel Opto kill ignition cutout
A must have for safety. Allows the engine to be stopped from your Tx. Plugs into a spare channel. No need to buy a seperate ignition switch.
Red LED to show when active
LiFe A123 6.6V 2300mah 30C battery. Comes with balance lead, JR or Deans type connector fitted.
$32
-Microprocessor controlled high-performance Rapid charger/discharger for NiCD/ NiMH/ Li-Polymer/ Lilo/ LiFe/ Pb battery
-Separate voltage detector for balance charge mode
Product Details
-12v or 240v input
-Operating Voltage Range: 11 ~ 18v
-Charge Current Range: 0.1 ~ 5.0A
-Discharge Current Range: 0.1 ~ 1.0A
-Circuit Charging Power: Max 50W
-Circuit Discharging Power: Max 5W
-Current Drain for Balancing Li-Polymer Battery: 300mAh/cell
-NiCd/NiMH Battery Cell Count: 1 ~ 15cells
-Lithium Battery Cell Count: 1 ~ 6 Series
-Pb Battery Voltage: 2 to 20V
-Cooling Fan: Included
-Dimensions: 135 x 149 x 40mm
-Net Weight: 800g
G.T. Power A6-DDualPower Li-Polymer Battery Manager
(Built-in AC Power)
30mm x 365mm Velcro tie wraps (3)
Excellent for securing batteries and fuel tanks.
$3.50
20mm x 300mm Velcro tie wraps. 4 per pack
Excellent for securing batteries and fuel tanks.
Custom machined standoffs made to your length.
Email your exact length & we will machine them.
To suit all engines we sell.
Set of 4 $38 Free reg post.
Deans type T connectors
Pack of 2 pairs
$2
Deans type T connectors
Pack of 10 pairs
$7
SP 3A 5v Switching BEC
Compact switching BEC
5-23v
2-5S Lipoly, 5-15 Cell Nicad or Nimh
11.5 gms including ferrite ring
Output 5v 3A continous
This is an excellent voltage regulator for use on petrol ignition & receiver when using Lipoly batteries.
Throttle extension arm. Fits all gas engine carbs. Can be rotated to any position. 3mm grub screw included. Because of it's offset it allows the throttle to clear the choke
Radio South Pro Hinge These are the best CA hinge in the world. Made in the USA.
They do not break or split. I have used them for years on models up to 50cc with very good success. The Chinese CA hinges are very suspect and it is a good idea to replace them with these. It comes in a 1" wide by 36" roll. Simply cut pieces 1" long.
Imax B8 Battery balance charger
Specifications:
Operating voltage: 10-18v
Circuit power: Max 150W
Charge current range: 0.1-7.0A
Discharge current range: 0.1-5.0A
Current drain for balancing: 300mah
NiCd / NiMh cell count: 1-27 cells
Lithium cells : 1-8 cells
Pb battery voltage: 2 to 36v
Weight : 547gms
Dimensions : 170x110x35
DLE-20 spinner adapter nut. M8x1
4mm thread for spinner screw
