Our new Laser has arrived and is now up and running. In the coming weeks we'll be listing the plans that we have in stock waiting for cutting short kits. The size we can cut is 2200mm long x 1200mm wide. So if you need a long fuselage side cut in one piece we can do it with ease.
Send us your plan, either paper or electronic, and we will generate all the parts in Autocad and cut the kit for you. If you want a model scaled up or down we can do that as well. The cost for scaling up or down will be a little bit higher, but not excessive. We are aiming to keep the cost as low as possible. If you can send us a DXF file the cost of cutting the kit is significantly reduced.
Plywood thicknesses we have in stock are.
Basswood 3 ply 1.5mm, 2mm, 2.5mm, 3mm,
Birch 5 ply 4mm and 6mm
Senior Telemaster 95" $150
Includes full size plans and reg post
Waco YMF-5 90" 50cc 1/4 scale
Includes full size plans and reg post
All laser cut kits are short kits and only include all formers and ribs, no sheeting, spars, cowls, canopies, wheel pants, fittings, fuel tank or wing tubes
Culver Dart 59" W/S .40 glow power $85
CAC CA-15 1/6th scale 72" W/S Airborne plans 45-50cc
Waco CTO Taperwing, cowled, 1/4 scale, 91" W/S, 50cc
Ryan STA 1/4 scale 91" W/S 30-36cc
Spacewalker 1/4 scale 91" W/S .90-1.20
P40 Kittyhawk 94" W/S 50cc
Gilmore Red Lion 25% 84" W/S 50cc
Very soon we will be manufacturing spar material from Australian Hoop Pine. Hoop Pine is a very good alternative to Spruce as it is light and very strong, similar to Spruce. Sizes will be available in imperial and metric, so they suit all plans, old and new
