At last there is an excellent high quality alternative to the high priced JR/Hitec/Futaba digital servo's. Now even modellers on a budget can afford the best servo's.
The Scanner-RC digital servo's have been around for a while but have only just been released on the Australian market. The servo's listed below feature full digital control, coreless motor for high speed and power, a 5A MOS-FET control, Titanium gearing and an aluminium body to dissipate heat. The mounting lugs are extra thick to cope with the high torque and speed. Dual ball bearings to take the side load and for long life.
All mounting hardware included.
These servos are suitable for use in all high performance, extreme flight 3D applications where only the very best will do.
Our Futaba aluminium servo arms fit them.
They also come with a full 12 month Warranty
Suitable for all size models.
All spares available.
Compare the price with the JR/Hitec/Futaba digitals and you will see they are less than half price with the same performance. Made in Taiwan, the same as Futaba. Hitec is made in the Philippines. So you can see that good quality does come out of Asia.
STL-9892CTG High Speed Digital Titanium geared coreless, 5A MOS-FET
Weight: 58 grams / 1.96oz.
Dimensions: 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 in.
Torque At 4.8V: 7.6kg-cm , 116oz-in
Torque At 6.0V: 9.2kg-cm , 130 oz-in
Speed At 4.8V: 0.10 sec / 60°at no load
Speed At 6.0V: 0.08 sec / 60°at no load
Motor Type: Japan Coreless Motor
Connector Wire Length 300mm (11.81in)
Connector : JR/Hitec
Ball Bearing: Dual Ball Bearing M 10 x 14
Gear Types Titanium Gears
STL-9894CTG High Torque Digital Titanium Geared Coreless 5A MOS-FET
Weight: 58 grams / 1.96oz.
Dimensions: 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 in.
Torque @ 4.8V: 17.5kg-cm , 215 oz-in
Torque @ 6.0V: 20.6kg-cm , 268 oz-in
Speed @ 4.8V: 0.19 sec / 60°at no load
Speed @ 6.0V: 0.16 sec / 60°at no load
Motor Type: Japan Coreless Motor
Connector Wire Length 300mm (11.81in)
Connector: JR/Hitec
Ball Bearing: Dual Ball Bearing M 10 x 14
Gear Types Titanium Gears
STL-9890CTG High Speed Digital Titanium Geared Coreless 5A MOS-FET
Weight: 58 grams / 1.96oz.
Dimensions: 40.5 x 20 x 37 mm / 1.60 x 0.78 x 1.52 in.
Torque At 4.8V: 13.8kg-cm , 170 oz-in
Torque At 6.0V: 16.2kg-cm , 196 oz-in
Speed At 4.8V: 0.14 sec / 60°at no load
Speed At 6.0V: 0.11 sec / 60°at no load
Motor Type: Japan Coreless Motor
Connector Wire Length 300mm (11.81in)
Connector : JR/Hitec
Ball Bearing: Dual Ball Bearing M 10 x 14
Gear Types Titanium Gears
HDS-9452MG 23g Mini Digital High Speed Metal Geared w/- Heat sink
This little servo is excellent for throttle on gas engines
Weight: 23.4grams / 0.71oz.
Dimensions: 31 x 15.5 x 26 mm / 1.16 x 0.51 x 1.02 in.
Input Voltage 3.6V ~ 6.0V
Torque At 4.8V: 3.4kg/cm , 43oz/in
Torque At 6.0V: 3.8kg/cm , 54oz/in
Speed At 4.8V: 0.11sec / 60 deg at no load
Speed At 6.0V: 0.09sec / 60 deg at no load
Ball Bearings
We recommend using either blue Loctite or a smear of Silastic on the center arm screw. This is most important when using either 4 stroke or petrol engines.
This is recommended for all servo's with a metal output shaft.
