Petrol engine CDI remote control switch
This product is mainly used for remote control operating of CDI gas engines, and can detect the receiver battery voltage supply. Remote control switch connected in series in between the CDI and the CDI power supply, Either by remote control channel or switch channels, for remote control on or off, so effectively protects the aircraft and personal safety. In addition it has a 4700uF large capacitor. Receiver power will be more stable, more pure. The capacitor prevents the sudden voltage drops and fluctuations associated with stalled servo's or high current drain, and improves the operation and stability of electronic devices. The switch has a safety feature, which does not allow the Opto switch to be accidentally on when you turn on your transmitter and receiver. When you turn on the Tx and Rx the Opto switch is off, no matter what position your Tx switch is in. So if you want your switch position to always be the same, make sure it is in your desired off position when you power up your Tx and Rx.
Features:
1, Red LED indicator shows the current state CDI ignition.
2, Two-color LED display real-time receiver supply voltage (detection voltage 5V/6V freely set), the receiver can avoid the loss of control due to insufficient power supply.
3, Large capacitor 4700UF keeps receiver voltage more stable and pure.
4, It can be used for other purposes, such as: control smoke pumps, retractable landing gear, smoke and other pyrotechnics.
5, Complete optical isolation between the receiver and the CDI,
Technical parameters:
1, Working voltage :3 --- 8v
2, Operating current :0 --- 4A.
3, Weight: 12gms
4, Size: 33mm (length) * 13mm (width) * 13mm (height).
